Current Clamp Adaptor

Our product range includes a wide range of ca-3000 flexible current probe / meter, km-ca500 ac/dc current clamp adaptor and ca-1000/ca ac / dc current clamp adaptor.

CA-3000 Flexible Current Probe / Meter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 9,245 / PieceGet Latest Price

Product Brochure

Product Details:

Model Name/Number	CA-3000
Brand	Kusam Meco
Jaw Open	5.8
Frequency Hz	45-500 Hz
Dimension	120(L) x 70(W) x 26(H) mm
Measurement Ranges	30A / 300A / 3000A AC
Output Sensitivity	100mV / 10 mV / 1mV per Amp (AC Coupled) (CA 3000)
Output Resolution	(LCD Display) 0.01A/0.1A/1A (CA 3000D)
Power Supply	1.5V AAA+2 Alkaline Battery
Accessories	Battery,User Manual and Carrying Case
Display Type	4 Digit LCD Display with Max Reading 3150 (CA-3000D)
Noise	0.03A/0.075A/0.5A (CA-3000)

Features :

18" flexible sensor fit around conductor. up to 5.8" in diameter.
TRMS Reading (CA 3000D)
8.5mm coil diameter allows measurement in tight spaces. (Double Insulated)
1.8m (6 ft) cable.
Flashing LED low battery Indicator. (CA 3000)
Dual banana plug tennlnatlon for direct Input Into DMM. (CA 3000)
EN 61010, CAT IV GOOV, CAT 1111000V.

Send Business Enquiry

KM-CA500 AC/DC Current Clamp Adaptor

REQUEST CALLBACK

Get Best Quote

Approx. Rs 6,109 / PieceGet Latest Price

Product Brochure

Product Details:

Jaw Opening Size	30 mm max.
Measuring Range	500A AC/DC
Rated Output	0 to 500mV (AC or DC) for 0 to 500A
Load Resistance	10 Ku typical (1mV/A)
Low Battery Indicator	Red LED lighting
Max Wire Length	3.5 meter when fully stretched
Operating Temperature	0 deg C~50 deg C; 70% R.H.
Storage Temperature	-2 0 deg C to 70 deg C; 80% R.H.
Power Supply	9V Battery
Dimension	178(L) X 70(W) X 33(H) mm
Weight	Approx. 290 gms
Brand	Kusam Meco
Model Number	KM-CA500

Special Features :

Basic Accuracy : 2.0%rdg + 2dgts
Average Sensing
CA 500 Current Clamp is a Transducer which will allow your multimeter to measure electrical Current upto 500Amp AC or DC, with a Frequency response upto 400Hz.
When measuring Current with this Clamp, there is no need to break a circuit or to affect the isolation.
It can be used for waveform analysis by connecting it to an Oscilloscope.

Send Business Enquiry

CA-1000/CA AC / DC Current Clamp Adaptor

REQUEST CALLBACK

Get Best Quote

Approx. Rs 4,290 / PieceGet Latest Price

Product Brochure

Product Details:

Brand	Kusam Meco
Model Number	CA-1000
Jaw Opening Size	57mm conductor,70 x 18 mm bus bars
Measuring Range	0 to 1000A AC or DC max. (Model CA 1000) - 0 to 1500A AC or 0 to 2000A DC max. (Model CA 2000)
Transfer Rate	1mV / 1A
System Accuracy	Current clamp accuracy + DMM accuracy
Operating Temperature	0 deg C ~ 50 deg C; at < 70% R.H.
Storage Temperature	-20 deg C to 60 deg C; < 80% R.H.
Temperature Coefficient	0.1 x (specified accuracy) / 1 deg C (0 deg C to 18 deg C,28 deg C to 50 deg C)
Altitude	6561.7 feet (2000M)
Output	Coil cable with straight banana plug
Max Wire Length	3.5 meter when fully stretched.
Low Battery Indicator	Red LED lighting
Power Supply	9V DC battery
Dimension	100(W) x 224(L) x 40(H) mm
Weight	Approx. 490 gms. (Including battery)

Features:

Basic Accuracy : 1.5%rdg + 2A
CA1000/CA2000 Current Clamp is a transducer which will allow your multimeter to measure electrical Current upto 500/1000/2000 amperes AC or DC, with a Frequency response upto 400Hz.
The clamp is built with a design of finger guard which ensures user operating the clamp under a safety situation, with a rugged case that is shock resistant and fire-retardant.
When measuring current with this clamp, there is no need to break a circuit or to affect the isolation.
It can be used for waveform analysis by connecting it to an oscilloscope.
Auto Zero function

Send Business Enquiry

Looking for Current Clamp Adaptor ?